HIGH-TEMP SILICONE SEALANT H315

Decoration Adhesive

Project Use Adhesive

Other Adhesive

WD-40

PU Foam Silicone Sealant Epoxy Sealant Tile Adhesive Liquid Nails

HIGH-TEMP SILICONE SEALANT H315

Product Features：

HIGH-TEMP SILICONE SEALANT H315 is a high quality, ready to use one component acetic silicone sealant, which withstands very high temperatures: up to +315℃ during permanent work and for temporary contact. It can be used as engine pad. Ideal repair of automobiles and motorcycles: sealing of engine and transmission components and accessories.

Consultation Purchase

Product Videos

Brochure

Product Details

1. PRODUCT FEATURE OF HIGH-TEMP SILICONE SEALANT H315

l Use temperature range from -40℃ to +315℃

l Movable seams fit

l Excellent adhesion to glass, brick, metal, ceramic, enamel, impregnated or painted wood and laminate, etc.

l Sealing of engine and transmission components and accessories.

2. PRODUCT PARAMETER (SPECIFICATION) OF HIGH-TEMP SILICONE SEALANT H315

Test Parameter	Unit	Result
As Supplied Tested at 23℃ and 50% RH
Specific Gravity	g/ml	0.98±0.02
Flow (sag or slump)	mm	0
Extrusion Rate Skin Time	ml/minute minute	130 5~10
Tack-free Time	hour	≤1.0
Curing time (5mm)	hour	≤8
As Cured-after 21 days at 23℃ and 50% RH
Durometer Hardness, Shore A	Points	30
Movement Capability	%	±25
Tensile/Modulus at 50% Elongation	Mpa	0.32
Tensile/Modulus at 100% Elongation	Mpa	0.38
Ultimate Tensile Strength Ultimate Elongation at Break	Mpa %	0.45 300

3. APPLICATION OF HIGH-TEMP SILICONE SEALANT H315

--Thoroughly clean and dry surface from oil, dirt and grease. Allow to dry completely before applying silicone.

--Cut the seal at the top of the cartridge and cut the nozzle at a 45° angle, to the size of the gap opening. Screw the nozzle to the top of the cartridge.

--Place the cartridge into a caulking gun.

--Hold the caulking gun at a 45° angle. Press the nozzle opening against the joint, apply steady pressure to the caulking gun and extrude the silicone sealant forcing the sealant into the gap and move in a pushing motion, along the joint in one smooth action.

--Sealant will cure fully in 48 hours. As this point any unwanted sealant can be removed by trimming with a sharp blade, but avoid under cutting the seal.

4. STORAGE AND SHELF LIFE OF HIGH-TEMP SILICONE SEALANT H315

12 months from manufacture date when store in cool dry locations below 25℃, keep away from heat source and direct sunlight during storage.

5. PRODUCT QUALIFICATION

6. PACKING, SHIPPING AND SERVING OF HIGH-TEMP SILICONE SEALANT H315

Packing: 50ml/50g of aluminum tube, 220ml to 300ml of cartridge, 590ml 600ml of sausage. 144pcs/ctn of aluminum tube, 24 ctgs/ctn of cartridge, 20 pcs/ctn of sausage. (For special specifications, please contact us.)

Shipping: Sea, air or land transportation

Serving: We provide free design service, and you’ll get excellent after-sales service, we committed to solving any problems that may occur when you use our products.

7.FAQ

Q: What’s the reason that after the silicone sealant cured, it will be crack out of the base material?

A: The base material is not match for silicone sealant or there are some duct on the base material surface when use the silicone sealant. In order to avoid this happen. Before use the silicone sealant, please kindly clean the base material surface and recommend to do the compatibility test.

Q: What’s the difference between Neutral silicone sealant and Acetic silicone sealant?

A. Neutral silicone sealant can be used both indoor or outdoor, but acetic silicone sealant just can be used indoor.