Adhesive PU Foam Gun Type A99
Product Features：Adhesive PU Foam Gun Type A99 is a one component aerosol polyurethane adhesive foam curing swiftly with moisture. Providing very fast and powerful adhesion for various construction materials, especially highly recommended for heat insulation systems.
1. PRODUCT FEATURES OF ADHESIVE PU FOAM GUN TYPE A99
l Powerful adhesion of polystyrene heat panels (XPS and EPS).
l Instant adhesion and wall plugging within two hours.
l More economical. Ready to use in aerosol can.
l Minimum 14 m² heat insulation panel adhesion for each can.
l Minimum expansion during drying period.
l After dried, no further expansion and shrinkage.
l A lighter material compared to plaster, alternative material, used in heat insulation systems.
l No more extra burden or weight to building.
l High yield up to 50 liters, depending on the humidity and temperature.
l Usable at low temperature like 0 °C
l It does not contain any propellant gases which are harmful to the ozone layer.
2. TYPICAL PROPERTIES OF ADHESIVE PU FOAM GUN TYPE A99
|
Base |
Polyurethane |
|
Consistency |
Stable Foam |
|
Curing System |
Moisture-cure |
|
Tack-Free Time (min) |
6±2min |
|
Drying Time |
Dust-free after 20-25 min. |
|
Cutting Time (hour) |
20-45MIN (+25℃) |
|
Yield (L) |
5055L |
|
Yield Metric |
14 m² |
|
Shrink |
None |
|
Post Expansion |
None |
|
Cellular Structure |
> 90% closed cells |
|
Specific Gravity (kg/m³) |
17~22 |
|
Shear Strength |
92 kgf/cm² |
|
Temperature Resistance |
-40℃~+100℃ |
|
Application Temperature Range |
+5℃~+35℃ |
|
Colour |
Champagne |
|
Fire Class (DIN 4102 ) |
B2 |
|
Insulation Factor (Mw/m.k) |
<30 |
|
Compressive Strength (kPa) |
>120 |
|
Tensile Strength (kPa) |
>30 (10%) |
|
Adhesive Strengh(kPa) |
>80 |
|
Water Absorption (ML) |
2~3(no epidermis) |
|
<0.5(with epidermis) |
3. APPLICATIONS AREAS OF ADHESIVE PU FOAM GUN TYPE A99
l Best for mounting heat insulation panels(styrofoam) and filling voids during adhesive application.
l Advised for wooden type construction materials adhesion to concrete, metal etc.
l Applications needed minimum expansion.
l Mounting and isolation for frames of windows and doors.
4. APPLICATION INSTRUCTIONS OF ADHESIVE PU FOAM GUN TYPE A99
5. STORAGE AND SHELF LIFE OF ADHESIVE PU FOAM GUN TYPE A99
12 months in unopened packing store in temperature between +5℃ to +25℃, Keep in cool, shade and well ventilated area. Always keep the can with the valve pointed upwards.
6. PRODUCT QUALIFICATION
7. PACKING, SHIPPING AND SERVING OF ADHESIVE PU FOAM GUN TYPE A99
Packing: 750ml 500ml 300ml, 12 cans/carton. (For special specifications, please contact us.)
Shipping: Sea or land transportation
Serving: We provide free design service, and you’ll get excellent after-sales service, we committed to solving any problems that may occur when you use our products.
8. FAQ
Q: What is the different of the pre-expansion and post expansion? Which one is better?
A: Pre-expansion is better. Post expansion will not only damage the doors and windows after curing, but also it will leads the cost of construction higher because more foam must be cut.
Q:What’s the impact for the PU foam with a big bubble or uneven cell?
A: Small bubble or smooth cell is a common performance for good quality PU foam. Big bubble foam will cause thermal and sound insulation ability reduce and it may even be water leakage.
tel：400-1866-616
address：112 Fuyuan Road, chagugang Town, Wuqing District, Tianjin
fax：022-82967400
Consultation Purchase